Mounting Adjust Roller Shutter Roof Blind Accessories Spring Mechanism Hook

Mounting Set Roller Shutter Roof Blind Accessories Spring Mechanism Hook
☑ Warranty Covers 3 Years of Use
☑ Includes Mounting Hardware Kit
⇒ Install Advanced Vehicle Safety

The spring mechanism suits into a winding tube with an inner diameter of 24 mm. The spring mechanism is inserted into the winding tube on the right side of the roller shutter. The spring must be unscrewed before the mechanism is fitted so that the roller blind can be rolled up. The upper winding tube and the weight are not included in the set. These items must be purchased separately.

Instruction:
1. measure the distance between the brackets.
2. screw on the brackets (left bracket with cross, right bracket with wheel).
3. place the roller blind in the brackets (the flat end in the bracket with cross), then hold the roller blind with both hands and turn the roller blind clockwise (to the right) 15 turns, and continue (the round end in the bracket with wheel).
Insert the handle heads (toothed cap on the left, smooth cap on the right).
5. Measure the distance between the hooks and then fasten them with screws.
Note: When fastening the hooks, it is important